LOT OF 6 ICE BLUE 8v 300mA LED WEDGE LAMP SX680 SX-880 SX-850 SX-950 SX-780

Description

LOT OF 6
ICE BLUE
8
V LED
WEDGE LAMPS
Fits Any Pioneer SX Series Receiver That Uses Standard 8v Incandescent Wedge Bulb
SX-680
SX-780
SX-850
SX-950
SX-880 SX-980
SX-1050 SX-1250
I have been restoring receivers for awhile now and upgrading the old incandescent bulbs with cooler running, more reliable LED's.
But while ordering replacement LED from various vendors, I sometimes ran into issues with the length of these bulbs. Many times I have received bulbs which are 28mm in length. This causes issues with clearance in a few receiver models. 28mm length bulbs that are mounted vertically rub the inside of the wooden case on some models, and on other models where the bulbs are mounted horizontal, the LED element directly contacts the back of the function mode light housing.
Therefore, I have acquired custom length bulbs which solves this issue, and these bulbs have the same brightness as other bulbs.
Because I had to order in bulk to have these custom sized, I'm passing these savings on to you!
These lamps are easy to change, because there is no soldering needed. They slide in and out of a factory Pioneer bulb mounting base. Replace all the old incandescent bulbs and you should never have to do this again. You will fall in love with your stereo receiver all over again once you install these new fuse lights. Your amp will actually run cooler and use less electrical current while you enjoy the soft backlighting it supplies.
Revitalize your vintage stereo receivers without worrying that you will be replacing the lamps again. These LED lamps provide a lite blue glow for tuner dials and level meters so your vintage equipment will come back to life.
I usually ship within 12 hours!
Check My Other Listings.